The Sanicondens Best Flat is a 2 in 1 condensate pump used to neutralize and pump condensate from condensing boilers, HVAC systems, water heater systems, etc.
It is one of the most powerful and quiet condensate pumps on the market.
The Sanicondens Best Flat will pump condensate waste up to 15 feet in height and/or 150 feet away from a soil stack.
Discharges the condensate waste through a 3/8 in. vinyl tube. A non-return valve is included on the discharge connection provided with the system.
Comes with provisions for a ready-to-wire connection to an external overflow switch that will shut down the appliance or alert the consumer in the event of overflow.
Includes all necessary hardware for installation (20 ft of vinyl tubing, inlet adapter, discharge adapter).
Discharges condensate from a condensing boiler or other condensate producing fixtures. The condensate will drain into the system via four 1 in. inlets located on top of the enclosure.
Comes equipped with a built-in neutralizer to raise pH levels for harsh HVAC applications. Neutralizing granules come included with the condensate pump. Will neutralize condensate from appliances up to 500,000 BTU/hour input.

Pump Type: Condensate Pump
Electrical: 120v - 60Hz / 1.5 amps (max)
Motor: 1/30 HP oil-filled thermally protected motor

Operating Temperature: 160 degrees F
Power Cord Length: 61-1/2 in.
Noise level (measured at 3 ft): less than 44 dBa (Lp)
Discharge Pipe: 3/8 in. diameter
Discharge Rate at 15 ft: 30 gph
Discharge Rate at 3 ft: 86 gph

Normal Running Time: 3 - 5 seconds (short bursts)
Capacity: 0.9 gallons
Inlets: 1 in. (top), 1 in. (side)
Method of Activation: Float / microswitch

Connections: Condensing boiler, HVAC systems, air conditioners
Certified by CSA (IPC, NSPC)
Dimensions: 15-7/16 in. x 5-7/16 in. x 6-3/4 in.
Weight: 12 lbs