Saniflo Saniplus Macerating Pump Only - 002
For full bathroom applications
The Saniplus is a 1/2 HP pump system used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack.
It incorporates a macerating system which can handle human waste and toilet paper in residential applications.
The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.
Discharges the waste through a 3/4 in. or 1 in. rigid pipe. A non-return valve is included on the discharge elbow assembly provided with the system. This elbow can be rotated 360 degrees depending on the discharge installation.
Has been designed with a 1-1/2 in. vent connection on the top of the lid. All plumbing codes require connection to a vent system. Please note that the vent system should be a two-way air vent as air needs to freely flow both ways. Note: The use of mechanical vents, air admittance valves or similar devices is not permitted.
Must be connected to Saniflo’s 1.28 GPF / 4.8 LPF rear discharge toilet. These toilets come in round and elongated (ADA compliant) models.
Will also discharge gray water from a sink, bath/shower, or urinal. The wastewater will drain into the system via two 2 in. inlets with built-in check valves on either side of the housing. Note that when adding a bathtub/shower, the base should be raised up by a minimum of 6 in. off the floor.
Pump Type: Macerator
Electrical: 120v - 60Hz / 4.5 amps (max)
Motor: 0.5 HP oil-filled thermally protected motor
Capacitor Rating: 45 microfarad
Operating Temperature: 104 degrees F (110 degrees F max)
Power Cord Length: 47-1/2 in.
Noise level (measured at 3 ft): less than 53 dBa
Discharge Pipe: 3/4 in. or 1 in. diameter
Discharge Rate at 15 ft: 17 gpm
Discharge Rate at 3 ft: 27 gpm
Shut-Off Head: 30 ft
Normal Running Time: 10 - 12 seconds
Capacity: 3 gallons
Inlets: 2 in. (sides) 1-1/2 in. vent (top)
Method of Activation: Membrane / microswitch
Shower/bathtub Base Height: 6 in. minimum
Connections: Rear outlet toilet, sink, shower/bathtub
Certified by CSA (IPC, NSPC), IAPMO (UPC)
Dimensions: 10-5/8 in. x 20 in. x 7 in.
Weight: 18 lbs
Global Trade Identification Numbers (GTIN numbers) for this product. GTINs appear on barcodes and identify products sold by different retailers as the same product.